Slide-In Range Trim Kit, Stainless Steel
Model:
W10675028
Model:
W10675028
Model: W10675028
Model: W10675028
Slide-In Range Trim Kit, Stainless Steel
W10675028
Model: W10675028
Key Features
•
This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
•
Package contains (1) Slide-In Range Trim Kit, Stainless Steel
•
No tools required for installation
•
30-Day Return Policy
Color:
Other
Temporarily out of stock
Accessories & Attachments
Items frequently bought together
Overview
Product Description
Slide-In Range Trim Kit, Stainless SteelThe Slide-In Range Trim Kit, Stainless Steel, includes (3) trim pieces and installation instructions. These stainless-steel accessories create a custom, built-in look for your 34" slide-in range and easily attach to the countertop with peel-off self-adhesive tape. This is an accessory that can be used with several brands; check to see if your model number is compatible. Installation of this part will require no tools, disassembly of the appliance or repair experience.
CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm -
Rated 4 out of
5
by
drog55chev from
Trim Kit #W10675028 for KSDB900ESS Range
I'm a contractor so I have installed a lot of slide in ranges. I didn't buy these on Amazon because it was not only unavailable but more expensive, same on the Whirlpool site. I bought it from Appliance Parts Pros. First off, there is only two things I don't like about this trim kit (W10675028). One is the finish. However the manufacturer makes it to fit probably half the Whirlpool ovens. Some will have a brushed stainless finish which would match and mine which is more of a polished stainless finish doesn't match but still looks okay. Second, the side trim pieces are 22-7/8" and if you have a normal countertop with a back splash only and push some ranges back to the wall like it should be, these side pieces would be too short. Fortunately my previous oven and countertop was cut as an alcove so there was 2-1/4" on the back. It says in the installation manual: "remaining counter depth should not exceed 2¼". Mine had about 2-3/4" to the wall so this works about right if I cut the back out another 1/2". All the pieces fit with the front bevel of the trim piece even with the front radius of the countertop. I'm glad I didn't cut that rear area out fully until I got the trim pieces. The front bevel on the trim piece should line up with the radius on the front countertop (see picture #1). I would prefer to cut out that entire rear area and push the range back 2-1/2 more inches because the range is pretty deep but you have to fudge back and forth to make things as good as they can be. My range has black side panels so those are noticeable. They could have made the side pieces longer and we could cut the length to fit. The only other way would be to go to a sheet metal shop and have pieces made which would match the range but would cost a lot more. I've done that before for other customers. A lot of people on these reviews say the trim pieces don't line up in the rear. I believe they're not installing these properly. The range needs to be about 1/8" above the countertop. If you can't get this measurement because of countertop or flooring thickness then these won't work or you'll have a gap if too high. The inside radius of the trim piece (see picture #3) needs to go over the top radius of the range not to its side. If you do that the rear connections will fit perfectly on each side (see picture #2). I also used a little silicon caulk under this trim kit to the oven to keep grease, etc. from getting underneath it. BTW the measurements of the trim pieces are: sides (22-7/8") and rear (31-1/16"). Hope this review helps others but other than the finish and side pieces needing to be longer I like them.
Date published: 2023-12-07
Rated 4 out of
5
by
drog55chev from
Trim Kit #W10675028 for KSDB900ESS Range
I'm a contractor so I have installed a lot of slide in ranges. I didn't buy these on Amazon because it was not only unavailable but more expensive, same on the Whirlpool site. I bought it from Appliance Parts Pros. First off, there is only two things I don't like about this trim kit (W10675028). One is the finish. However the manufacturer makes it to fit probably half the Whirlpool ovens. Some will have a brushed stainless finish which would match and mine which is more of a polished stainless finish doesn't match but still looks okay. Second, the side trim pieces are 22-7/8" and if you have a normal countertop with a back splash only and push some ranges back to the wall like it should be, these side pieces would be too short. Fortunately my previous oven and countertop was cut as an alcove so there was 2-1/4" on the back. It says in the installation manual: "remaining counter depth should not exceed 2¼". Mine had about 2-3/4" to the wall so this works about right if I cut the back out another 1/2". All the pieces fit with the front bevel of the trim piece even with the front radius of the countertop. I'm glad I didn't cut that rear area out fully until I got the trim pieces. The front bevel on the trim piece should line up with the radius on the front countertop (see picture #1). I would perfer to cut out that entire rear area and push the range back 2-1/2 more inches because the range is pretty deep but you have to fudge back and forth to make things as good as they can be. My range has black side panels so those are noticeable. They could have made the side pieces longer and we could cut the length to fit. The only other way would be to go to a sheet metal shop and have pieces made which would match the range but would cost a lot more. I've done that before for other customers. A lot of people on these reviews say the trim pieces don't line up in the rear. I believe they're not installing these properly. The range needs to be about 1/8" above the countertop. If you can't get this measurement because of countertop or flooring thickness then these won't work or you'll have a gap if too high. The inside radius of the trim piece (see picture #3) needs to go over the top radius of the range not to its side. If you do that the rear connections will fit perfectly on each side (see picture #2). I also used a little silicon caulk under this trim kit to the oven to keep grease, etc. from getting underneath it. BTW the measurements of the trim pieces are: sides (22-7/8") and rear (31-1/16"). Hope this review helps others but other than the finish and side pieces needing to be longer I like them.
Date published: 2023-12-07
Rated 4 out of
5
by
seattle from
Fits well, but should be included
Regarding color, we think it’s just fine. However it also comes in white and black in case you want to get creative or if that would better blend in with your granite. Home Depot has them in stock.
My granite cutter was apprently drunk when he cut the hole, so this did the trick to cover the crookedness.
-1 star that Kitchenaid doesn’t include this as standard with a slide-in range.
Date published: 2019-01-19
Rated 4 out of
5
by
Zen6543 from
Fits ok
Fits ok, better than nothing, but God Forbid they have it in stock....
Date published: 2019-01-11
Rated 2 out of
5
by
jeff313 from
Could be better
First the finish looks more like aluminum and does not match the stainless steel stove. This is a real disappointment that ruins the factory look of the stove. Second the side pieces need to be a little bit longer and thirdly the side and back pieces do not line up properly. If you line up the corners the beveled edges do not match and likewise if you line up the beveled edges the corners do not match. The only real good thing is the 3M double sided tape that does an excellent job holding the pieces in place.
Date published: 2020-06-19
Rated 1 out of
5
by
Patti FL from
Trim kit is pointless
I agree with all the reviews. For a range over $3K, the kit should be standard and it should FIT! I will be sending it back and live with the gap at the rear. The gap exists because of the space needed between the rear of the range and the back wall.
Date published: 2023-08-08
Manuals & Documents
Why Buy From Kitchenaid
Fits right
Generic accessories may look the same, but Kitchenaid Genuine Accessories are manufactured to precise specifications to fit makes and models of our quality appliance brands
Impeccable design & function
Kitchenaid Genuine Accessories are engineered to function flawlessly with Whirlpool Corporation appliance brands
Timeless strength
Kitchenaid Genuine Accessories com from Whirlpool Corporation, and draw from 100 years of experience in home appliance manufacturing. We engineer our accessories to go the distance and put our products through rigorous testing to ensure quality.
